How To Easily Install A Bidet Sprayer – Step-by-Step

Disclosure: Some of the product links on this website may contain affiliate links, which means we may earn money or products from the companies mentioned in this post.

How To Install A Bidet Sprayer

People all over the world use a bidet sprayer for its simplicity and efficiency. Compared to a toilet paper, a bidet hose is far more hygienic and efficient. They offer an easy and a smart way to maintain proper hygiene after using toilet.

And the best part? You will not need toilet paper anymore once you start using a bidet sprayer. All you will need is a clean towel to dry yourself off. This, in turn, will reduce your dependency on the toilet paper — and that’s good news for both the environment and your wallet.

Also, a bidet sprayer is easy to install. All that is needed is adding a valve to your water connection under the toilet! This will send clean water to your bidet sprayer. Yup, it’s that easy. (And once you’re through with the installation, don’t forget to read our how to use a bidet sprayer post to find out how to use a handheld bidet correctly from the word go.)

In this post, we’ll take you through all the steps you need to perform to install a bidet sprayer. However, before you start the installation, you need to first take care of a few things.

Before You Install a Bidet Sprayer

Check the water supply line, that is, the pipe that carries water from the mainline to your house. Make sure it has a flexible hose. If the pipe is rigid, you will have to replace it with a flexible hose before installing a handheld bidet.  

Step-By-Step Guide to Install a Bidet Sprayer

First Step – Switch the Water Supply Off

The first thing you need to do is switch off your water supply valve, typically located at the wall next to the water closet. You can turn it off by twisting it clockwise. Once you’ve done that, don’t forget to flush the toilet. We recommend you to hold the flush handle down until the tank is completely empty.

Second Step – Connect the T-Valve

Next, unscrew your flexible water supply hose. You must unscrew it at the fill valve under the toilet tank. Now, make sure the flat rubber washer is inside the top of the T-valve of your bidet.

In case you are having difficulty deciding which part is the top of T-valve, look for a spinning nut. The top is where the spinning nut is located.

Finally, screw T-valve’s top into the fill valve of the toilet. Yes, the same place where you had unscrewed your water supply hose. Make sure you don’t tighten the screw too lightly.

Third Step – Connect the Two Hoses

You need to screw the water supply hose of your toilet onto the T-valve’s bottom. Now, connect one end of your bidet hose to the side of the T-valve. Next, screw your bidet hose into the other end.

Fourth Step – Turn the Water Supply on

Turn on your water supply valve. In case the connection is leaking or loose, we recommend adding a bit of plumber’s tape. That will tighten the connection nicely and ensure there’s no leaking. In case there are no leaks, you can start using the bidet sprayer!

Check out this video if you prefer viewing directions:

Warm Water Bidet (Handheld)

Want a bidet sprayer with hot and cold water?

Well, that’s easily possible. All you need is a bidet mixing valve. This valve will connect to the faucet’s hot water line under the sink. You can then simply use the handle of the valve to adjust the water temperature.   

How to Prevent Bidet Sprayer from Leaking?

A Loose connection is the main reason why leakage happens after installation. We recommend you wrap the PTFE seal tape around the bidet sprayer’s T-valve threads, which are located at the bottom of this valve. This tape lubricates the connection, as a result you of which you will be able to screw the T-valve tightly with your water hose supply later. This, in turn, will prevent leakage because of installation issues.

However, leakage can occur because of other reasons as well, reasons that have got nothing to do with the installation. Other than a faulty installation, the biggest cause of leakage is the failure to completely turn off the bidet after every single use.

To turn off a bidet sprayer completely, you need to do two things. First, stop the flow of water at the bidet sprayer head. This you can do by releasing the handler of the sprayer. However, remember that this alone won’t properly shut off a bidet. To do that, you will also have to shut off the T-valve of your bidet spray.

Why do I need to do that? You may be wondering.

Well, a bidet sprayer works pretty much the same was as a regular garden hose. After watering the plants, you let go of the handle, which in turn stops the water. However, the water is not yet completely turned off! You will have to turn off the spigot, located at the farther end of your garden hose. In case you don’t do that, your garden hose may start leaking or even burst.

A handheld bidet works on the exact principle. Releasing its trigger or handle just stops the sprayer jet. However, the water pressure is still building against your bidet hose. Over a period of time, this water pressure can cause damage, resulting in leaking. So don’t forget to turn off the bidet’s T-valve to completely shut off the water. 

And in case your bidet is already leaking, the only way forward is to change the leaking part. Once you’ve done that, you can keep your bidet sprayer leak-free by shutting it off completely after every single use.

Frequently Asked Questions

How do I use a bidet sprayer correctly?

If you want to learn how to use a bidet sprayer without making a mess, keep the following simple instructions in mind.

  • First, locate the bidet sprayer, usually located near a toilet tank.
  • Next, turn on the bidet’s T-valve.
  • Now, aim the bidet sprayer. To be able to do that, it’s important you don’t shift from side to side. Instead, sit comfortably, just like you would when you use the toilet, and start cleaning either from the back or the front by gently pulling the sprayer trigger.
  • Dry yourself off with tissue paper.
  • Finally, turn off the T-valve after you have finished. 

What are the main benefits of using a bidet sprayer?

Bidet sprayers are becoming more and more common since they offer several advantages. For one, the bidet sprayer is extremely easy to hold and thus provides an easy and convenient way to clean ourselves. Secondly, a bidet sprayer can prove extremely beneficial if you have a rectal itch or irritation. You can use it without worrying about any bacterial infection. Thirdly, you can use a bidet hose for other purposes, like cleaning your toilet or washing your pet after a walk outdoors.